Once you have a site or maybe an application, speed is extremely important. The swifter your web site loads and then the swifter your web apps perform, the better for you. Because a site is only a variety of files that talk with each other, the systems that keep and work with these files have a huge role in web site operation.

Hard drives, or HDDs, were, right up until the past several years, the most trustworthy products for storing data. However, in recent times solid–state drives, or SSDs, have been gathering popularity. Look at our comparison chart to find out whether HDDs or SSDs are more effective for you.

1. Access Time

Image

Because of a radical new solution to disk drive operation, SSD drives permit for considerably faster file accessibility speeds. With an SSD, data file accessibility instances are far lower (just 0.1 millisecond).

Image

HDD drives continue to take advantage of the very same general file access concept that was originally developed in the 1950s. Although it has been substantially upgraded after that, it’s sluggish when compared with what SSDs are providing. HDD drives’ data file access rate varies in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the exact same revolutionary solution allowing for a lot faster access times, it’s also possible to get pleasure from greater I/O efficiency with SSD drives. They are able to conduct double the operations during a specific time as compared with an HDD drive.

An SSD can manage at least 6000 IO’s per second.

Image

Throughout the same tests, the HDD drives proved to be significantly slower, with simply 400 IO operations handled per second. Although this feels like a significant number, for people with a busy server that contains numerous well–known web sites, a sluggish harddrive could lead to slow–loading websites.

3. Reliability

Image

The lack of moving parts and spinning disks in SSD drives, as well as the latest improvements in electronic interface technology have led to a considerably less risky data storage device, with an typical failing rate of 0.5%.

Image

For the HDD drive to operate, it has to spin a few metallic disks at a minimum of 7200 rpm, holding them magnetically stabilized in mid–air. There is a whole lot of moving elements, motors, magnets and also other gadgets packed in a tiny location. Consequently it’s obvious why the average rate of failing of the HDD drive can vary among 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably smaller than HDD drives as well as they don’t have virtually any moving components whatsoever. It means that they don’t create just as much heat and require significantly less power to work and much less power for cooling down purposes.

SSDs use up between 2 and 5 watts.

Image

As soon as they have been built, HDDs were always very energy–ravenous devices. And when you’ve got a hosting server with many types of HDD drives, this will certainly increase the per month electric bill.

Normally, HDDs consume in between 6 and 15 watts.

5. CPU Power

Image

The faster the data access speed is, the quicker the file requests are going to be delt with. Because of this the CPU won’t have to hold allocations waiting around for the SSD to answer back.

The average I/O wait for SSD drives is merely 1%.

Image

HDD drives permit reduced access speeds compared to SSDs do, which will result in the CPU being required to hang around, while arranging allocations for the HDD to discover and return the demanded data file.

The average I/O delay for HDD drives is just about 7%.

6.Input/Output Request Times

Image

The bulk of LIVING-NETWORK’s new web servers are now using only SSD drives. All of our tests have indicated that utilizing an SSD, the average service time for any I/O request while operating a backup stays below 20 ms.

Image

During the exact same tests with the same server, this time fitted out utilizing HDDs, overall performance was considerably reduced. During the server back up procedure, the standard service time for any I/O requests fluctuated between 400 and 500 ms.

7. Backup Rates

Image

You can feel the real–world benefits to having SSD drives every single day. For instance, on a server pre–loaded with SSD drives, a complete data backup is going to take just 6 hours.

Image

Over the years, we have got utilized predominantly HDD drives on our web servers and we’re well aware of their functionality. On a server loaded with HDD drives, an entire hosting server data backup typically takes about 20 to 24 hours.

The VPS hosting plans and the routine cloud plans accounts offer SSD drives by default. Be a part of our LIVING-NETWORK family, and see how we may help you enhance your website.


  • Service guarantees

  •  
  • Register now. There are no configuration service fees and you will have total admin access to the server. 99.9% network uptime is guaranteed.
  • Compare our prices

  •  
  • Conveniently compare the parameters and characteristics provided by our Virtual Private Servers. Find out which VPS Hosting configuration provides you with just what you want to deal with your multi–media online presence comfortably.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us 24/7/365 by email or by using our extra–fast ticketing system. Our technicians are going to reply to any requests in up to 60 minutes.